7 trigger control errors and how to fix them
Friday, October 16, 2015
In my years of training shooters, I have observed major trigger control errors in my students. I have also experienced several of these mistakes myself, so I want to share some advice to help other shooters.
I have learned the hard way that the first step in overcoming our mistakes is to identify what the problem is, so I want to specify seven trigger control errors, briefly give you my observations, and some general tips to fix these miscues.
Jerking the trigger at the last second is a mental and physical issue, but primarily a mental one. Shooters must understand the necessity for mentally focusing on their trigger press and train the jerk or slapping motion out of their mechanics. If shooters are consistently shooting to the lower left (as a right-handed shooter), they are probably quickly yanking the trigger back and, perhaps, not even realizing it.
A jerk comes from the attempt to fire the shot quickly at a specific point in time that coincides with when the gun becomes immediately positioned on the target. I learned for myself that my eye was usually focused on the target and not on the front sight. Some call this "timing" the shot.
At that instantaneous point in time when the shooter sees the sights on the target, he quickly and suddenly yanks on the trigger with the trigger finger so as to hurriedly and immediately fire the shot. The shooter jerks the trigger if he presses the trigger the instant he has a perfect sight alignment.
However, this quick reaction or slap usually results in the movement and compression of the rest of the fingers of the dominant hand on the grip and/or the muscles in the hand and wrist to move the muzzle off the target just before the bullet exits the muzzle.
Believe me I know all about this error. Sometimes for me, my anticipation and anxiousness are the genuine culprits for my jerk error.
I have improved, but must continually discipline my mind to overcome my jerk by mentally concentrating and focusing on the trigger press fundamentals and having a slow, smooth and deliberate trigger press with minimal movement of my other fingers and hand, while focusing on only the front sight. Sounds easy, but a challenge for me.
This is more of a physical response to a shot being fired where the shooter perceives the bang to be unpleasant and possibly dangerous. Flinching is stimulated by the loud noise and movement of a dangerous weapon near the face and head.
We know that firing a gun will make a loud noise and there will be recoil. So, it also is a mental issue because we are thinking about and anticipating the recoil and loud noise. Anticipating the upcoming recoil with the loud bang causes our premature reaction to the sound and results in a flinch.
With right-handed shooters, rounds usually impact high to the right or left. Also, if your shots are hitting all over the target in a wide group, you might be anticipating the recoil and flinching.
I actually have had some new shooter students who close their eyes while pressing the trigger and simultaneously shove the gun away from their face and head. Most did not even realize they shoved the gun at the last second before the shot. Of course, this movement often results in moving the gun's muzzle off target and affects accuracy.
Sometimes a flinch is confused with a jerk. The result of a flinch is usually a shot farther from the desired target hit than a trigger jerk, but both do not achieve the desired target hit. I have observed students with a flinch even missing the entire target, as well as having widely-dispersed hits.
I must remind myself to physically maintain control of the gun at all times, grip the gun firmly, continue to follow through after my shot, not anticipate the noise and recoil, and be comfortable with the sound of the gun. I have found that putting a lot of rounds down range through practice helps me to overcome my flinch, to accept that I am in control of the gun, and to understand that the movement and noise are not related to my safe shooting practices. I do not fear the gun and noise and so have no reason to flinch.
Here is a helpful technique to identify and overcome flinches. I have found I can verify the flinch error by students by loading one of their magazines randomly with snap caps or dummy rounds mixed between regular rounds. So they do not know if the round they will be firing is a real round or a snap cap/dummy. Often a flinch is masked by the recoil of the gun itself, so shooters do not know nor recognize they are flinching.
Several students have emphatically said to me they are not flinching, but I knew better. By mixing the rounds, it is evident to the shooter that they are definitely flinching. When they press the trigger and the dummy round does not fire and they cause movement, they will then have strong, positive feedback that they are indeed anticipating the noise and recoil and are flinching.
Milking the trigger is a common trigger control error. Milking means that your grip fingers are also contracting as your index trigger finger contracts to press the trigger. Of course, just your trigger finger should move, and it should move straight back, smoothly, continuously, without interruption and nonintermittently (not stop-and-go.) Milking is extra movement that affects accuracy.
Fundamentally then, only the trigger finger should move when pressing the trigger. That movement should be straight back, rather than sideways or up or down. The trigger finger should be isolated from the other fingers of your shooting hand and your index trigger finger should be the only finger that moves.
Shooters must recognize that when you grab or press something with one hand and fingers, especially while under stress, your opposite hand and fingers may want to unintentionally mirror that movement with a sympathetic response.
Studies have shown some inadvertently fire their gun while doing something with their nongun hand or fingers, so be careful! Shooters must focus on using the trigger finger independently so as to minimize extraneous movement, while maintaining a constant, consistent grip on the gun with the rest of the hand. Practice develops the muscle memory.
This occurs when the shooter exerts excessive forward pressure with the heel of the hand as the gun is fired. This pressure forces the front sight up just as the trigger trips the sear. It will usually result in a shot group high near the 12:00
Thumbing is squeezing the thumb or applying too much trigger finger/thumb pressure when firing the shot. For example, if a right-handed shooter rotates his thumb clockwise to the right during the trigger press, the rounds will likely hit to the right, a thumbing error.
Without a doubt, the point of bullet impact is dependent on the movement of the shooter's trigger finger, thumb and hand at the moment the trigger is pressed. Proper grip is a key factor to help prevent the thumbing error. I like to rest my strong thumb firmly on top of my support thumb and try to not move my strong thumb and fingers sympathetically with movement of my trigger finger during the press.
Pushing the gun up, down or to either side with no follow through is a common error, especially for new shooters. Placing too little of the finger on the trigger causes the finger to push the trigger back and to the left instead of straight back, so bullets impact the target at 9:00 or
7. Holding too long
This error draws out the trigger press because the shooter wants a perfect shot and target hit. I see this in new handgun students frequently because they want to qualify and not have bad shots, so they are slow, indecisive and overly cautious in their trigger press.
They do not exert positive and proper pressure on the trigger at the proper time. Instead of 3 seconds or so, they may take 7 to 8 seconds for just one shot in basic training. They hold their breath and shot too long.
A consequence of a long hold is that the shooter's breath control is poor, and there usually is undesirable movement and less accuracy. The shooter may not have enough air to hold his breath for the long time to minimize movement, and this actually causes just the opposite of what he wants — a miss or an inaccurate shot because of more movement.
Naturally, in a real-life encounter or tactical situation, this delay could be deadly. So for your initial training as a new shooter at the range, get that shot off in no longer than 3 seconds, if not sooner. But remember, train for accuracy first with proper fundamentals, then train for speed.
This personal opinion article is meant for general information and educational purposes only. The author strongly recommends that you seek counsel from an attorney for legal advice and your own personal certified weapons trainer for proper guidance about shooting and using your firearms, self-defense and concealed carry. It should not be relied upon as accurate for all shooters, and the author assumes no responsibility for anyone's use of the information and shall not be liable for any improper or incorrect use of the information or any damages or injuries incurred whatsoever.
© 2015 Col Benjamin Findley. All Rights Reserved. This article may not be reprinted or reproduced in whole or in part by mechanical means, photocopying, electronic reproduction, scanning or any other means without prior written permission. For copyright information, contact Col Ben Findley at ColBFF@gmail.com.
- The dangers of mixing up 5.56x45mm NATO and .223 Remington rounds
- How to properly sight in a rifle with a scope
- Battery issues: Understanding your RV’s electrical systems
- The advantages of using a .45-70 cartridge
- To fight crime, engage kids in quality after-school programs
- The stress of 911 call-takers and emergency dispatchers
- Pros and cons of the wadcutter bullet
- Esalen evolution: A retreat for the next age
- 10 trends that will impact how HR works in 2021
- Is the BMW M440i the best possible coupe?
- The building blocks of an association
- Why digital transformation is crucial for e-commerce success
- The delicate balance of supply and demand for COVID-19 vaccines
See your work in future editions
Your content, Your Expertise,
Your Industry Needs YOUR Expert Voice & We've got the platform you needFind Out How